The APAC manufacturing plant in Georgia is proud to provide customers with the finest quality adhesive products available. Our safe, state of the art equipment makes APAC one of the most modern adhesive manufacturing plants in the industry. Our Dalton, Georgia facility conforms to all federal, state and local regulations governing the handling of flammable and nonflammable adhesives.
At APAC we manufacture our own complete line of solvent-based adhesives. These specialty adhesives are preferred by many customers for their quick drying and fast cure properties even under the most difficult and extreme climatic conditions. As always it is extremely important to know and understand the special precautions necessary when handling and using these solvent-based adhesives. APAC clearly marks the products that are flammable and provides Technical Data Sheets and Material Safety Data Sheets for each product. We strongly recommend that all who sell these solvent-based adhesive discuss the proper use and handling of these products with their customers. Please contact APAC adhesives customer service department if you have any concerns over our flammable products.
• Surface Coating Products
• Solvent-Based Specialty Products (Flammable)
• VOC Compliant Specialty Products (Nonflammable)
Primer/Sealers • Tac Abatement • Adhesive Remover • Solvent Cleaner • Carpet Seam Sealer
Pad Adhesive • Contact Cement • Outdoor Carpet Adhesive • Aerosol Construction Adhesive
 |
 |
|
APAC ADHESIVES:
Use V-Block™ or ENCapSeal™
with APAC's Premium Professional Grade adhesives and the warranty will be extended to 7-years.
<more information.>
|
ECOlogical FLOOR PREPARATION PRODUCTS (SOLVENT FREE)
Surface Coatings • Primers • Sealers • Adhesive Removers |
||
| ENCapSeal™ Encapsulator Sealer-Primer
|
• Encapsulates Old Adhesive Residue Including Cutback Residue • Seals Surfaces & Reduces moisture Emission • Moisture & Alkali Resistant • Contains ECOPROTEK® (Total Antimicrobial Protection) • Reduces Odor Transmission Associated with Damp Slabs • improves Long-Term Bond Aging Just click on the link to download the following product information: Spanish: |
TYPES OF FLOORING:
Wood, Carpet, Ceramic Tile, VCT, Cork Resilient RECOMMENDED SUBSTRATES: TYPICAL COVERAGE: |
| V-Block™ Primer-Sealer
|
• Seals Surfaces & Reduces Moisture Emission • Moisture & Alkali Resistant • Easy To Apply • Solvent Free • Improves Adhesion • improves Long-Term Bond Aging • Contains ECOPROTEK® total antimicrobial protection Use: Just click on the link to download the following product information: Spanish: |
TYPE FLOORING: Wood, Carpet, Ceramic Tile, VCT, Cork Resilient RECOMMENDED SUBSTRATES: TYPICAL COVERAGE: |
| TacAbate Surface Tack Abatement Coating
|
• Adhesive Tack Abatement • Roller or Spray Application • Solvent Free • Environmentally Safe • Contains ECOPROTEK® total antimicrobial protection Just click on the link to download the following product information: Spanish |
USES: Designed for use as an adhesive tack abatement surface coating TYPICAL COVERAGE: |
| EZ Strip D4 Carpet & Adhesive Remover
|
• Low Odor • Contains No Chlorinated Solvents • Non-Alkaline (less irritating) • Concentrated (dilutable with water) • Fast Acting • Remove Floor Covering and Adhesive • Rinses Clean with Water • Nonflammable Just click on the link to download the following product information: |
USES: • To remove direct glue down carpeting installations as well as the adhesive residue left on the floor after removal. • To soften clear thin spread residue left after removal of VCT, allowing for the residue to be scraped up and disposed of. • To remove felt back sheet goods adhesives, along with the felt residue left after old sheet goods have been pulled up. • To soften pressure sensitive acrylic base adhesives after the removal of vinyl/PVC backed carpet tile. COVERAGE: |
|
SOLVENT-BASE SPECIALTY PRODUCTS (FLAMMABLE)
|
||
| CAUTION! FLAMMABLE Solvent-based adhesives are can be labeled as EXTREMELY FLAMMABLE; FLAMMABLE; or COMBUSTIBLE. Read the label for everyone's health and safety. For more information on handling flammable products, please see our Tech Note #005 Handling Flammable Adhesives. |
||
| 001 Solvent Cleaner
|
001 is a flammable solvent based cleaner specially formulated to clean many different types of stains from carpeting. 001 will dissolve most adhesive from carpeting as well as installation tools. Stains such as grease, oil, tar, chewing gum, paint, wax, tape residue, crayon, lipstick, and heel marks can also be removed with this product. Do not use on plastic, rubber, polished or lacquered surfaces. • Quick Dry • Low Odor • Freeze-Thaw Stable Just click on the link to download the following product information: Spanish: |
USES: Carpet Adhesives, Tape Residue, Carpet Seam Adhesives, Grease, Oil, Tar, Paint or Wax, Chewing Gum, Crayon, Lipstick & Heel Marks Do not use on plastic, rubber, polished or lacquered surfaces. |
| 613 Carpet Seam Sealer
|
• Excellent for Direct Glue & Double Glue Applications • Prevents Edge Raveling • Freeze-Thaw Stable • Permanent Bond • Waterproof • Fast Setting • Limited Warranty Just click on the link to download the following product information: Spanish: |
USES: ActionBac®, Jute, Latex Unitary, Woven, Rubber Backed, Urethane (attached cushion), Direct Glue & Double Glue Applications ESTIMATED COVERAGE: |
|
614
Pad Adhesive
|
• Ideal for Bonding Urethane, Rubber, Hair & Jute Padding to Concrete or terrazzo Subfloors • Can Be Used For Residential or Commercial Carpet Padding • May Be Used Over Asphalt or Vinyl Tile • Strong Initial Tack • Freeze-Thaw Stable • High Strength • Permanent Bond Just click on the link to download the following product information: Spanish: |
USES: Rebond Urethane, Prime Urethane, Frothed Urethane, Sponge Rubber, Foam Rubber, Hair & Jute, and Synthetic Hair & Jute COVERAGE: |
| 616 Premium Contact Cement
|
• Standard Grade • Excellent Bond • For Permanent Bond • Excellent Resistance to Moisture & Heat • Design For Brush Application • Excellent Resistance to Aging Weather & Moisture Just click on the link to download the following product information: Spanish: |
USES: High Pressure Laminates to Plywood, Particle Board, Metal, Other Core Materials, Leather, Wood, Rubber, Fabrics and Similar Materials APPLICATION: COVERAGE: |
| 630 Outsider II All Weather Outdoor Carpet Adhesive
|
• For Permanent Bond of Outdoor Carpet & Artificial Turf • Water Resistant • Rapid Setting • High-Strength • For Outdoor Use Only (Extremely Flammable) Just click on the link to download the following product information: Spanish: If you are looking for a nonflammable outdoor adhesive, check out APAC's Outsider I 630. |
USES: Polyurethane Insulation Blocks, Bead Board, Insulation, Carpet & Carpet Pad, Polyethylene Film, Sanding Discs, Paper, Cardboard, Fabrics, Urethane Foam, Foil, Metal, Wood and Most Plastics COVERAGE:
|
| VOC COMPLIANT OR NONFLAMMABLE SPECIALTY PRODUCTS | ||
| Outsider I
631
|
• For Permanent Bond • Very High Solids • Water Resistant • High-Strength • Fast Setting • Nonflammable Just click on the link to download the following product information: For information on APAC's Professional Grade outdoor adhesives Outsider II 630, click here. |
USES: Rubber-, Marine-, Polypropylene-backed, Non-backed Outdoor Carpet, and Artificial Turf COVERAGE:
|
| 701 Latex Seaming Adhesive
|
• VOC Compliant • Resistant to Fungus & Mildew • Water Resistant • Quick Drying • Great for Carpet Repairs • Semi-transparent When Dry • Prevents Edge Raveling • Flexible • Nonflammable Just click on the link to download the following product information: Spanish: |
USES: • All types of carpet: ActionBac®, Jute, Latex Unitary, Woven, Urethane (attached cushion) and Rubber Backed (Not for use with vinyl backed floor covering.) • Various types of fabrics, patches on furniture, auto upholstery, etc., coat backs of throw rugs to make them skid proof TYPICAL COVERAGE: APPLICATION: |
