APAC 20 is a concentrated acrylic primer used before installing self-leveling underlayments or topping materials on porous floor substrates. APAC 20 dries to a green color for easy identification.

APAC 31 is a low-VOC, water-based acrylic primer that improves the performance and adhesion of self-leveling underlayments (SLUs) on nonabsorbent surfaces such as ceramic tile, vinyl composition tile (VCT) and adhesive residue, as well as profiled, absorbent surfaces.

APAC 40 is a regular-setting, high-strength, self-leveling cement-based underlayment and repair mix for interior concrete and engineer-approved floors that are to later receive tile, stone or other floor-covering materials.

APAC 44 is a fast-setting, cement-based, self-leveling, self-drying underlayment and repair mix for interior concrete and engineer-approved floors before the installation of tile, stone, wood, vinyl, carpet or other floor-covering materials.

APAC 50 is a quick-setting, latex-fortified, sanded cement-based patching compound where, when mixed only with water, floor covering can be installed in just 1 hour after application. Mix with APAC 51 latex liquid additive to use as an embossing leveler or to skimcoat properly prepared cutback adhesive residue.

APAC 51 is an acrylic additive that extends the pot life of APAC 50 fast-setting patch. When mixed with APAC 50, it can be used as an embossing leveler or to skimcoat properly prepared cutback adhesive residue.

APAC 60 is a highly engineered, polymer-modified, fiber-reinforced cement-based feather-finish and patching compound. Use APAC 60 to patch or skimcoat minor surface defects on a variety of substrates, creating a strong, durable surface ready for a variety of floor applications.

APAC 70 is a high-performance, 100%-solids, two-part epoxy, one-coat moisture barrier system for concrete slabs that exhibit moisture vapor emission rates (MVERs) up to 20 lbs. per 1,000 sq. ft. per 24 hours and reduces transmission rates to less than 3 lbs. APAC 70's unique formulation penetrates into the concrete substrate while creating a solid film layer on the surface for the ultimate in moisture transmission reduction.

ENCapSeal is a high-solids, fast-drying, polymer-based compound formulated to treat moisture in concrete slabs of up to 8 lbs. per 1,000 sq. ft. per 24 hours, and up to 90% relative humidity when applied in a double-coat method. It also serves to control elevated alkalinity (pH) on concrete slabs and isolate old adhesive residues in direct glue-down floor-covering
applications.

APAC V-Block is a polymer-based, primer-sealer and subfloor moisture treatment product designed to seal fresh (new) concrete subfloors that show a diminishing moisture emission rate of up to 8 lbs. per 1000 square feet or less per 24 hours, or less than 85% relative humidity (RH). APAC V-Block will allow for fast-track flooring installations where the only other alternative is to let the concrete subfloor dry to meet flooring manufacturer's recommendations. It is easily applied by a 1/4" nap roller and forms a tough, moisture-resistant film over the substrate surface. APAC V-Block also seals porous and dusty surfaces, which improves adhesive spread rates, improves adhesion and long-term bond aging.

APAC TacAbate is a polymer-based, surface coating designed to eliminate the tackiness of adhesive residues remaining after most common floor coverings have been removed. APAC TacAbate is compatible with many different adhesive residues, including acrylic and SBR-based. When dry, it is a suitable substrate for subsequent installation of carpet tile or
broadloom carpet.